Thiết bị truyền dẫn quang STM1 -ADM / TM - O9150S

Model: O9150S

The O9150S is standard equipment for SDH-MSTP with VC-12 directly reaching the network terminal


The Loop-O9150S SDH STM1 TM/ADM is a standard equipment device for SDH/MSTP networks with VC-12 directly reaching the network terminal. Through an STM-1 uplink, the O9150S provides VC-12 standard E1s and Ethernet supporting VCAT, GFP, and LCAS protocol. The O9150S is a comprehensive fiber transmission platform for traditional telecom business and broadband information business applications. As well, it is suited to adapt to general data in Metropolitan Area Networks and audio and information business data in Private Networks.

 

On the aggregate side, the O9150S has two STM-1 ports supporting MSP (1+1) TM and SNCP for ADM protection. On the tributary side, the O9150S has four Ethernets and up to two 8-port E1. As terminal equipment, the O9150S can be built in a range of complex topologies such as star, linear and ring. These can support a non-blocking cross-connect between different business interfaces.

All interfaces are fully compliant with the relevant ANSI standards and ITU recommendations. The O9150S provides fault management, performance monitoring, configuration management, and network security management. Through the console port, LAN port and DCC channel, the OAM&P can be achieved both locally and remotely via SNMP or menu-driven interfaces. O9150S supports the LoopView GUI EMS (Element Management System).

  • 1U height, ETSI shelf (full front access) or ANSI shelf (front and rear access)
  • SDH STM-1TM/ADM
  • Aggregate port
    • 2 SFP optical housing
    • MSP 1+1 protection
    • SNCP protection
  • Tributary port (manufacturing option)
    • Two 8-port E1 ports with DB37 connector or  16-port E1 ports with RJ48C and four 10/100 (FE) Ethernet ports
    • 8-port E1 with RJ48C connector and 8-port E1 with DB37 connector, with four 10/100 (FE) Ethernet ports
    • 8-port E1 ports with RJ48C /DB37and two 10/100 (FE) Ethernet ports
    • 4-port E1 ports with RJ48C/DB37and two  10/100 (FE) Ethernet ports
  • Hot swappable power Modules, dual power modules for redundancy
    • DC power -48 Vdc (-36 to -72Vdc)
    • AC power (100 to 240 Vac)
  • Networking protection
    • MSP (1+1) protection for TM(Terminal Multiplexer)
    • SNCP protection for ADM (Add/Drop Mux)
  • VC-12 cross-connect
  • 4-Ethernet Port for total 63xVC12, with independent port configuration
  • Supports Internal/Line clock
  • Supports VCAT, GFP, and LCAS
  • Supports E-Line
  • Performance monitoring
  • Alarm suppression, masking, and reporting
  • Management:
    • Console port
    • SNMP port
    • Centralized management with Loop’s EMS over DCC channel
    • LoopView GUI EMS
    • Telnet support
  • RoHS compliant

Sản phẩm khác

  • Loop-O9500R

    Loop-O9500R

    O9500R

    The Loop-O9500R SDH/SONET IMAP (Integrated Multi-Services Access Platform) is an economical STM-1/4/16 (OC-3/12/48) access multiplexer designed to provide integrated access to STM-1/4/16 (OC-3/12/48) optical lines.
  • O9400R SDH/SONET ADM/TM

    O9400R SDH/SONET ADM/TM

    O9400R

    The Loop-O9400R STM-1/4/16 (OC-3/12/48) is a standards-compliant high density SDH/SONET ADM/TM with a full T1/E1 cross-connect rack system. Data sheet    
  • Thiết bị STM1/4 - O9550R-C

    Thiết bị STM1/4 - O9550R-C

    O9550R-C

    Per chassis single STM-1/4 (OC-3/12) optical ring uplinks Up to four STM-1/4 (OC-3/12) aggregate lines that are software configurable Capacity for 5 single slots and 4 mini plug-in slots Non-blocking N x 64 Kbps for 252 E1 or 336 T1 for data and voice channel transmission for uplink site Maximum of 36 E1 or 24 T1 in the tributary interfaces
  • Loop - O9550R-D

    Loop - O9550R-D

    O9550R-D

    The Loop-O9550-D SDH SONET IMAP (Integrated Multi-Service Access Platform) is an economical STM-1/4 (OC-3/12) access multiplexer. It is designed to combine digital access interfaces, including TDM, IP, and voice interfaces into STM-1/4 (OC-3/12) optical lines for convenient transport and switching.
  • Loop-O9100 ADM/TM

    Loop-O9100 ADM/TM

    Loop-O9100

    The Loop-O9100 ADM/TM is an economic, compact STM1 ADM & TM Multiplexer designed to add and drop up to the following:  
  • Loop-O9100

    Loop-O9100

    O9100

    This device is a versatile STM1 ADM TM multiplexer with a small footprint.
  • Loop-O9170S

    Loop-O9170S

    O9170S

    Loop-O9170S is an economical, cost-effective SDH STM-1 Mux designed to combine digital access interfaces including TDM, IP, and voice interfaces into STM-1 optical lines for convenient transport and switching. Through STM-1 uplink, O9170S provides VC-12 standard E1s and Ethernet supporting VCAT, GFP, and LCAS protocol.
  • O9400S SDH/SONET ADM/TM

    O9400S SDH/SONET ADM/TM

    O9400S

    SDH / SONET multiplexer ADM / TM - O9400S The Loop-O9400S ADM/TM is a compact, economic STM1/4 (OC-3/12) ADM & TM multiplexer.
  • Loop-O9550R-A

    Loop-O9550R-A

    O9550R-A

    The Loop-O9550 SDH SONET IMAP (Integrated Multi-Service Access Platform) is an economical STM-1/4 (OC-3/12) access multiplexer. It is designed to combine digital access interfaces, including TDM, IP, and voice interfaces into STM-1/4 (OC-3/12) optical lines for convenient transport and switching.