TDMoE gateway 32 E1 / T1 / STM / OC - IP6763

Model: IP6763

The Loop-IP6763 transports E1/T1 plus STM-1 signals over an IP network. 


As the core communications network migrates from legacy TDM to Metro Ethernet to leverage CapEx and OpEx efficiently, the Loop-IP6763 TDMoEthernet Aggregator provides a cost-effective solution which allows operators to transport up to 32 E1/T1, 4 STM-1/OC-3 or 1 STM-4/OC-12 along with 4 Giga LAN traffic over existing Metro Ethernet network. The E1/T1 SCSI interface is fixed on main board while there are two hot-swappable tributary slots for STM-1/OC-3 or STM-4/OC-12 plug-in card types.

Loop-IP6763 TDMoEthernet Aggregator converts the TDM data stream and timing information from both PDH and SDH/SONET ports into packets and transmits to the connected Metro Ethernet network via dual combo Gigabit Ethernet WAN ports with 802.3ad Link Aggregation capability. Another Pseudowire device converts the received packet stream back to original PDH and SDH/SONET data stream along with the original timing information.

Loop-IP6763 TDMoEthernet Aggregator employs various Pseudowire Encapsulation protocols such as SAToP, SONET/SDH CEP, CESoPSN, MEF-8. To compensate the inherent Packet Delay Variation (PDV) of Metro Ethernet network, Loop-IP6763 TDMoEthernet Aggregator utilizes Jitter Buffer Control and can compensate up to 128 ms with G.823/G.824 Traffic Interface conformance (+/- 1ppm).

Security is highly ensured via SSHv1/SSHv2 function and SNMPv1/v3 management.

Mechanics and Electrics
  • 1U height, ETSI shelf
  • Replaceable FAN and Air Filter
  • Power Module: -48Vdc
  • (Over-voltage protection and Load sharing)
WAN Aggregate Interface
  • 2 Combo GbE with SFP housing and RJ45 Connector
  • 802.3ad Link Aggregation
  • STP/RSTP/MSTP
User Tributary Interface
  • 2 slots for hot-swappable plug-in cards:
    • Up to 2 Dual STM-1/OC-3 cards with MSP(1+1)/cross-card MSP(1+1)
    • Up to 1 Dual STM-4/OC-12 card
  • Ethernet Tributary interface:
    • 3 x 10/100/1000 BASE-T Ethernet ports plus 1 user-selectable Ethernet/SNMP port
    • Speed/Duplex Auto-negotiation
    • 802.3ad Link Aggregation
  • On-board E1/ T1 Interface:
    • 32 E1/T1 with SCSI connector
L2 Switching
  • 10G non-blocking switching capacity
  • Jumbo frame size up to 13K bytes
  • IS-IS packet transparency*
  • VLAN
    • Maximum 4094 VLAN ID
    • Support C-VLAN/S-VLAN tag adding and removing on Pseudowire
    • 802.1q Port-based VLAN on Ethernet port
    • VLAN-based packet filtering
    • Support Q-in-Q
  • Support 802.1d MAC Learning (max. 26K)
  • Support 803.3x Flow control on input ports
  • Support 802.1D STP, 802.1s MSTP, 802.1w RSTP
  • Support IGMP Snoopingv2 (RFC 2236)
QoS
  • Ingress Rate Limiting per Ethernet port with 100kbps granularity
  • Ethernet Network Level:
    • 3-bit Priority Code Point – PCP field within 802.1P/802.1Q Ethernet frame – CoS
    • 8 priority queues per port
  • IP Network Level:
    • 8 priority queues per port
    • 6-bit DiffServ Code Point -DSCP field – ToS
  • Scheduling Algorithm
    • Strict Priority (SP)
    • Weighted Round Robin (WRR)
    • Deficit Weighted Round Robin (DWRR)
  • Congestion Avoidance
    • Random Early Detection (RED)
    • Weighted Random Early Detection (WRED)
  • Pseudowire Capability
  • Support SAToP, SONET/SDH CEP, CESoPSN, MEF-8
  • Support framed/unframed E1/T1
  • Support VC4 transparent/channelized STM-1 and STS3C
  • transparent/channelized OC-3
  • Support TDM traffic emulation over, UDP/IP and Metro Ethernet Network
  • Support Timeslot Grooming
  • Support VC4-4C STM4 and STS12C OC12
  • Backplane capacity: up to 252xVT11/VT12 bandwidth
  • Maximum 512 Pseudowires
  • Up to 32 Pseudowires can apply Adaptive Clock Recovery (ACR) mechanism
  • PDV Compensation Depth: up to 128 ms
  • Jitter Buffer Size: up to 256 ms
  • Supports IPv4 addressing
  • Excel calculator is provided*
Pseudowire Diagnostics Function*
  • ARP, Ping and Trace Route
  • IP – MAC Table Display
  • Pseudowire Information
    • Packet Creation Time (ms)
    • Jitter-Tolerance Delay (ms)
    • Single-Trip Delay (ms)
    • Total Frame Length (bytes)
    • Packet per second
    • Required Bandwidth (Mbps)
    • Header Overhead (%)
    • Remaining WAN Bandwidth (Mbps)
    • Remaining Memory
Jitter and Wander
  • PPM version: conforms to G.823/G.824 Traffic Interface (+/- 1ppm)
Timing Reference
  • Internal
  • External
  • Line(both PDH and SDH)
  • Adaptive Clock Recovery
OAM Capability
  • Support 2 SNTP Timing References
  • Multi-color LED indicators
  • Alarm Relay
  • ACO (Alarm Cutoff) button
Management Interface
  • 1 user-selectable Ethernet/SNMP Port
  • SNMP v1/ v3
  • DB9 Console port with VT100 menu
  • Telnet and SSHv1/SSHv2
  • C-VLAN tag on management traffic
  • C-VLAN/S-VLAN tag on pseudowire traffic
  • Support IPv4 Routing over DCC channel on SDH/SONET interface
    • Static Route, RIP I/II
Standards Compliance
  • SAToP, SONET/SDH CEP, CESoPSN, MEF-8
Support Heart Beating Protection

*Future Option

Sản phẩm khác

  • E1 / T1 and DTE / TDMoE - IP6702A

    E1 / T1 and DTE / TDMoE - IP6702A

    IP6702A

    The Loop-IP6702A devices transport Unframed/Framed 1 E1 (1 Unframed/Framed T1) data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP or CESoPSN .
  • Modem quang PDH - O9310

    Modem quang PDH - O9310

    O9310

    Loop Telecom's Loop-O Fiber Optical Mux product family provides ideal solutions for building fiber-based E1 or T1 networks. The Loop-O9310 can multiplex up to 4 E1 or 4 T1 signals for transmission over an optical fiber, resulting in longer reach without repeaters and superior performance compared to copper media.
  • Fiber and G.SHDSL modems chassis - C5600

    Fiber and G.SHDSL modems chassis - C5600

    The Loop-C5600 is a high-density Multi-Services Shelf designed to accept a mix of Loop series rack cards.
  • Thiết bị chuyển đồi E1/FE1- E1200

    Thiết bị chuyển đồi E1/FE1- E1200

    E1200

    Loop Telecom's Loop-E1200 FE1 CSU / DSU series provides access to the E1 network at a competitively low price.
  • Multiservice Access TDMoE - IP6704A

    Multiservice Access TDMoE - IP6704A

    IP6704A

    The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*.
  • Thiết bị chuyển đổi Ethernet to IP-IP6750

    Thiết bị chuyển đổi Ethernet to IP-IP6750

    IP6750

    The Loop-IP6750 Service Aggregation & Access Device is an effective way for service providers to build their network and achieve a fast return on investment. Currently providers need to transport both TDM and Packet traffic. These can be achieved using the E1/T1 and Gigabit Ethernet tributary ports of the IP6750.