Gas Tracer

Model: Gas Tracer

Built around high-quality micro-sensor technology, the Gas Tracer is RKI’s smallest personal 5 sensor monitor with a built in sample pump.


  • Monitors ppm, LEL, and % volume methane, O2 and CO
  • PPM leak detector, detects down to 10 ppm CH4
  • “Leak tracker” audible/visual alarm mode for CH4 and CO
  • 0 to 100% volume Methane option
  • Auto-ranging display of % LEL and % volume
  • Barhole test mode
  • Bump test reminder option
  • Snap-logging – on demand data recording
  • Pump pause on demand
  • Internal sample drawing pump with up to 50 foot range
  • Lithium ion or alkaline power battery packs (interchangeable)
  • Up to 600 hours of datalogging with alarm trends
  • Intrinsically safe, ATEX/IECEx/CE or c CSA us (Optional)

Specifications

Gas Detected
Combustible Gases
(Methane as standard)
% Volume
Methane
PPM
Methane
Oxygen (O2)
Carbon Monoxide (CO)
Detection Principle
Catalytic combustion
Thermal conductivity
MOS
catalytic
Galvanic cell
Electro- chemical cell
Detection Range
0 ~ 100% LEL
0 ~ 100% Vol.
0 ~ 5000 ppm
optional 10,000 ppm range version available
0 ~ 40% Vol.
0 ~ 500 ppm
Accuracy Statement
(whichever is greater)
± 5% of reading or
± 2% LEL
± 5% of reading or ± 2% of full scale
± 10% of reading or ± 50 ppm CH4
± 0.5% O2
± 5% of reading or ± 5 ppm CO
Sampling Method Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter
Display Digital LCD with 7 segments, auto backlight during alarm
Preset Alarms
(User Adjustable) 		1st alarm 10% LEL
2nd alarm 50% LEL
Over alarm 100% LEL		 No alarms for
% Vol. CH4		 Increasing tone/light pulse as concentration increases Low alarm 19.5% High alarm 23.5% Over alarm 40.0% 1st 25 ppm
2nd 50 ppm
TWA 25 ppm
STEL 200 ppm
Over 500 ppm
Alarms Types Leak Tracker Mode: Escalating audible/visual alarm, changes with gas level (audible can be turned off)
Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER
Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error
Alarm Methods Gas alarms: Flashing lights, two tone buzzer, and vibration
Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration
Operating Temp. & Humidity -20°C to +50°C (-4°F to +122°F)
0 to 95% RH, non-condensing
Response Time Within 30 seconds (T90)
Continuous Operation Alkaline battery: 15 hours Li-Ion battery: 10 hours
70°F (21°C)
Power Source Li-Ion battery pack, or 3 “AA” Alkaline battery pack; interchangeable
Safety Rating ATEX, TIIS, IECEx, CE, or optionally: c CSA us classified, as intrinsically safe. Class I, Division 1, Groups A, B, C, D
Note: Either ATEX (USA and worldwide) or CSA (Canada) version must be specified when ordering.
Dimension & Weight Approx. 143 (H) x 71 (W) x 43 (D) mm (5.6” H x 2.8” W x 1.6” D), approx. 350 g (12.3 ounces)
Case Material High dust & water resistant design. RFI shielded high impact plastic with protective rubber overmolding
Controls Five buttons: POWER / ENTER, DISPLAY, AIR, RESET, SHIFT
Standard Accessories • Belt clip • Rubber nozzle, 2.5” • Datalogging software
• 10” Probe • Manual • Quick reference card
• 10’ Hose • Training CD
Optional Accessories • SDM-2012 calibration stations • Calibration kit
• Li-Ion battery pack • AC or DC Charger
• Sample draw hoses (10’ standard, up to 50’ max. available) • Carrying case
Configurations 1, 2, 3, 4, or 5 sensor units
Li-Ion or alkaline battery pack options

 

Sản phẩm khác

  • Giám sát khí LEL, O2, H2S & CO Model GX-2009

    Giám sát khí LEL, O2, H2S & CO Model GX-2009

    GX-2009

    The smallest and lightest 4-gas portable multi gas detector in the world. Weighing only 4.6 ounces, it fits in the palm of your hand (2.75” H x 2.95” L x .98” D). The GX-2009 simultaneously monitors and displays combustibles, oxygen, carbon monoxide, and hydrogen sulfide.
  • GX-6000 Benzene Gas Monitor

    GX-6000 Benzene Gas Monitor

    GX-6000

    The GX-6000 is a game changer and it just changed the game again with the Benzene Specific measuring mode. With the addition of the highly selective 10.0 eV PID sensor, the GX-6000 can now detect the BTEX family of VOC’s including benzene
  • GX-6000 PID Gas Monitor, O2, CO, H2S, VOC and Super Toxic Sensors

    GX-6000 PID Gas Monitor, O2, CO, H2S, VOC and Super Toxic Sensors

    GX-6000 PID

    Simply put, the GX-6000 is a game changer. This powerful hand-held PID gas monitor is capable of simultaneously monitoring up to 6 gases.  
  • GX-2012 gas monitor

    GX-2012 gas monitor

    GX-2012

    With the GX-2012, you have multiple tools in one instrument. Having 3 operating modes, the GX-2012 can be used for confined space, safety monitoring in it’s Normal Operating mode; for leak investigation in Leak Check mode
  • Eagle 2 gas monitor

    Eagle 2 gas monitor

    Eagle 2 gas monitor

    The PID sensor is capable of detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases. Other smart sensors include % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor;