Máy tiện CNC Heavy Duty Lathe

Model: DL-660 / 760 / 840 X 1000, 1500, 2000, 3000, 4000

This is a heavy duty precision CNC lathe that the function of output full horse power during
low & high speed, available for big, special parts and mold work pieces.


  • 1.This is a heavy duty precision CNC lathe that the function of output full horse power during
    low & high speed, available for big, special parts and mold work pieces.
  • 2. The structure of Bed is adopted high toughness meehanite cast iron; stabilize properly
    parallel precision. Bed ways are induction hardened and ground.
  • 3. The slide way and ball screw can be lubricated automatically by central lubrication system.
    Oil flow and lubrication frequency can be set as desired. An alarm occurs in case of lack of
    oil.
  • 4. The coolant system delivers high pressure coolant to flush chips and extend tool service life.
  • 5. Mechanical and electrical are designed all in one.

Specifications :

  Model DL-660 / 760 / 840
1000 1500
Capacity Swing over Bed 660 (26") / 760 (29.92") / 840 (33")
Swing over cross slide 400 (15.75") / 500 (19.69") / 580 (22.84")
Distance between centers 1000 (39.37") 1500 (59.06")
Width of Bed 420 (16.54")
Length of Bed 2640 (103.94") 3140 (123.62")
Bed way of Carriage 1 mountain way + 1 box way
Bed way of cross slide Dovetail slide way
Headstock Spindle bore 105 (4.13")
Spindle nose A2-8
Range of spindle speed 20-1300rpm
* It changed by different horsepower of Motor.
No. of spindle speed 4 steps
Travel X-axis travel
(cross slide travel)		 330(13”) / 380 (14.96”) / 420 (16.54”)
by manual 4-way tool post
Z-axis travel 
(longitudinal travel)		 1000 (39.37") 1500 (59.06")
* It changed by different turret、chuck or Tailstock.
X-axis ball screw diameter 25 mm ,  pitch 5 mm
Z-axis ball screw diameter 50 mm ,  pitch 10 mm
Feed X-axis rapid feed 5000 mm/min (196.85" /min)
Z-axis rapid feed  7500 mm/min (295.28" /min)
X-axis cutting feed rate 0-3000 mm/min (118.11" /min)
Z-axis cutting feed rate 0-5000 mm/min (196.85" /min)
TURRET Tool station manual 4 way
Size of external turning 25x25 (0.98" x0.98")
Boring bar diameter 40 ( 1.57" )
Tailstock Quill diameter 105 (4.13")
Quill travel 180 (7.09")
Taper of center MT 6
Motor Spindle Motor 11 kw ( 15 HP )
X-Axis servo Motor 1.8 kw ( 2.4 HP)
Z-Axis servo Motor 1.8 kw ( 2.4 HP)
Hydraulic pump Motor 1.5 kw ( 2 HP)
Coolant pump 0.75 kw  (1HP )
Measurement N.W. / G.W. (approx)
(kgs)DL-660		 4600 / 4800 5200 / 5400
N.W. / G.W. (approx)
(kgs)DL-760		 4900 / 5100 5500 / 5700
N.W. / G.W. (approx)
(kgs)DL-840		 5100 / 5300 5700 / 5900
Machine dimensions
(L x W x H)(approx)		 4340x2235x1960
(171"x88"x78")		 4840x2235x1960 
(191"x88"x78")
Packing size (by1x20’container ) 4500x2290x2240 5000x2290x2240
(L x W x H)(approx) (177"x90"x88") (197"x90"x88")
Standard Color Upper parts: RAL-7035 light gray + Lower parts: RAL-7024 dark gray
  Model DL-660 / 760 / 840
2000 3000 4000
Capacity Swing over Bed 660 (26") / 760 (29.92") / 840 (33")
Swing over cross slide 400 (15.75") / 500 (19.69") / 580 (22.84")
Distance between centers 2000 (78.74") 3000 (118") 4000(157")
Width of Bed 420 (16.54")
Length of Bed 3640 (143.3") 4640 (182.68") 5640(222")
Bed way of Carriage 1 mountain way + 1 box way
Bed way of cross slide Dovetail slide way
Headstock Spindle bore 105 (4.13")
Spindle nose A2-8
Range of spindle speed 20-1300rpm
* It changed by different horsepower of Motor.
No. of spindle speed 4 steps
Travel X-axis travel
(cross slide travel)		 330(13”) / 380 (14.96”) / 420 (16.54”)
by manual 4-way tool post
Z-axis travel 
(longitudinal travel)		 2000 (78.74") 3000 (118") 4000(157")
* It changed by different turret、chuck or Tailstock.
X-axis ball screw diameter 25 mm ,  pitch 5 mm
Z-axis ball screw diameter 50 mm ,  pitch 10 mm
Feed X-axis rapid feed 5000 mm/min (196.85" /min)
Z-axis rapid feed  7500 mm/min (295.28" /min)
X-axis cutting feed rate 0-3000 mm/min (118.11" /min)
Z-axis cutting feed rate 0-5000 mm/min (196.85" /min)
TURRET Tool station manual 4 way
Size of external turning 25x25 (0.98" x0.98")
Boring bar diameter 40 ( 1.57" )
Tailstock Quill diameter 105 (4.13")
Quill travel 180 (7.09")
Taper of center MT 6
Motor Spindle Motor 11 kw ( 15 HP )
X-Axis servo Motor 1.8 kw ( 2.4 HP)
Z-Axis servo Motor 1.8 kw ( 2.4 HP)
Hydraulic pump Motor 1.5 kw ( 2 HP)
Coolant pump 0.75 kw  (1HP )
Measurement N.W. / G.W. (approx)
(kgs)DL-660		 5900 / 6200 7000 / 7300 8100 / 8500
N.W. / G.W. (approx)
(kgs)DL-760		 6200 / 6500 7300 / 7600 8400 / 8800
N.W. / G.W. (approx)
(kgs)DL-840		 6400 / 6700 7700 / 8100 9000 / 9400
Machine dimensions
(L x W x H)(approx)		 5340x2235x1960
(211"x88"x78")		 6340x2235x1960
(250"x88"x78")		 7340x2235x1960
(289"x88"x78")
Packing size 5500x2290x2240 6500x2290x2240 7500x2290x2240
(L x W x H)(approx) (217"x90"x88") (257"x90"x88") (295"x90"x88")
Standard Color Upper parts: RAL-7035 light gray + Lower parts: RAL-7024 dark gray

Sản phẩm khác