2JP(B)-22 Mining Electric Rake

Model: 2JP(B)-22

2JP(B)-22 Mining Electric Rake mainly used for metal mines, coal mines and other mines underground or open ore handling and filling operations can also be used for small inclination slope scraping, but not for lifting equipment. Parallel type Electric rake with PB series scraper loader have the same function host.


Introduction of 2JP(B)-22 Mining Electric Rake

2JP(B)-22 Mining Electric Rake mainly used for metal mines, coal mines and other mines underground or open ore handling and filling operations can also be used for small inclination slope scraping, but not for lifting equipment. Parallel type Electric rake with PB series scraper loader have the same function host.

Structure of 2JP(B)-22 Mining Electric Rake

Main components of 2JP(B)-22 Mining Electric Rake are deceleration devices, the main roller, sub roll, controls, rope guider and motor. These components are mounted both inside and outside of housing. The housing is a better steel parts, not only have protection and supporting, but also bear the full load. It is bolted to two skids connected with foundation .

Electric Scraper Winch 
Item  Unit  2JP(B)-7.5  2JP(B)-15  2JP(B)-22  2JP(B)-30  2JP(B)-55 
(Not less than) 
(Much or less than 5% )
Second wire rope's average speed m/s  1 1.5 1.6 1.6 1.8
(Much or less than 5% ) 
Steel wire rope's diameter  Main wire rope diameter  mm  9.3 12.5 14 15.5 18.5
Second wire rope diameter  mm  9.3 11 11 14 16
Drum  Diameter(mm)  205 225 280 280 350
Rim diameter(mm)  350 435 510 510 625
Width(mm)  80 125 510 160 180
Main drum rope capacity  m  45 80 80 80 100
Second drum rope capacity  m  45 100 100 110 130
Electric power  Kw  7.5 15 22 30 55
Rotate speed  r/min  1440 1460 1470 1470 1470
Dimension  Length  mm  1210 1525 1600 1650 2070
Width  mm  565 660 730 820 1010
Height  mm  490 620 640 700 890
Weight  KG  390 660 900 1155 2125