Home | |

Fiber and G.SHDSL modems chassis - C5600

The Loop-C5600 is a high-density Multi-Services Shelf designed to accept a mix of Loop series rack cards.


The Loop-C5600 is a high density multi-services shelf designed to accept a mix of Loop series rack cards. These include the Loop-H3308R, Loop-H3304R, Loop-H3304RA, and Loop-O9340R. The C5600 provides one common controller to manage up to 15 plug-in cards and a dual controller* to manage up to 14 plug-in cards

  • For 1 controller card C5600 chassis
    • 15 single slot H3308R (2/4-pair G.SHDSL.bis)
    • 7 dual slot H3308R (8-pair G.SHDSL.bis)
    • 14 single slot H3304R
    • 14 (2Ethernet + 4E1) and 1 (2Ethernet only) H3304RA
    • 7 dual slot O9340R
  • For dual controller card C5600 chassis*
    • 14 single slot H3308R (2/4-pair G.SHDSL.bis)
    • 7 dual slot H3308R (8-pair G.SHDSL.bis)
    • 14 single slot H3304R
    • 14 (2Ethernet + 4E1) H3304RA
    • 7 dual slot O9340R
Supports local configuration and diagnostics by using a local or remote terminal

Loop-C5600 Integral Access Shelf supports local configuration and diagnostics by using a local or remote terminal. Users are able to address and identify each rack card’s position and its card type. This enables users to execute in-service diagnostics and fault isolation.

By using SNMP or Telnet connection on the shared controller card of the rack unit, users can remotely control and diagnose Loop rack cards from a centralized location.

  • Front and back access (ANSI) unit with optional fan tray and LCD
  • Supports dual controller cards*
  • Number of plug-in line cards
    • Single controller with 15 slots for plug-in line cards
    • Each line card is fully independent
  • Accepts rack card of type:
    • Loop-H3308R Ethernet over Bonded G.SHDSL.bis
    • Loop-H3304R High Density G.SHDSL
    • Loop-H3304RA High Density G.SHDSL.bis
    • Loop-O9340R Multi-Services Gigabit FOM
  • Power modules
    • Hot-swappable DC plug-in modules(-48 Vdc: -36 to -75 Vdc), dual for redundancy
  • Alarm relay
  • Log in and password security protection
  • Firmware download
  • Configuration upload/download
  • Management port and interface
    • RS232 console port with VT-100 menu
    • Two 10/100M fast Ethernet SNMP ports
    • SNMP v1 with 5 trap IP
    • Telnet with Secure Shell (SSH) protocol
    • Access Control List (ACL)
    • RoHS compliant

Others

  • E1 / T1 and DTE / TDMoE - IP6702A

    E1 / T1 and DTE / TDMoE - IP6702A

    IP6702A

    The Loop-IP6702A devices transport Unframed/Framed 1 E1 (1 Unframed/Framed T1) data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP or CESoPSN .
  • Fiber Optical Multiplexer 4E1 Ethernet - O9310

    Fiber Optical Multiplexer 4E1 Ethernet - O9310

    O9310

    Loop Telecom's Loop-O Fiber Optical Mux product family provides ideal solutions for building fiber-based E1 or T1 networks. The Loop-O9310 can multiplex up to 4 E1 or 4 T1 signals for transmission over an optical fiber, resulting in longer reach without repeaters and superior performance compared to copper media.