T(P)GS-R6416XT

Model: T(P)GS-R6416XT

16 10/100/1000T + 4 10G Copper (with 8/10/16 PoE), EN50155 OS4 Managed Ethernet Switch w/ Enhanced G.8032 Ring, PXE ; WVI input


16 10/100/1000T + 4 10G Copper (with 8/10/16 PoE), EN50155 OS4 Managed Ethernet Switch w/ Enhanced G.8032 Ring, PXE ; WVI input

    • Total 16 Port 10/100/1000T + 4 10G Copper Switch
    • PoE model: with 8/10 (8 copper + 2 uplink 10GT copper PoE ports) or 16 PoE ports
    • PoE model: Support IEEE802.3at/af up to 30W per port; PoE management incl. Detection and Scheduling
    • Support PXE to verify switch firmware with the latest or certain version on server
    • Enhanced G.8032 ring protection < 20ms for single ring. Supports enhanced mode and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 8 MSTI /RSTP; support MRP ring
    • Miss-wiring avoidance & node failure protection
    • User friendly UI, including auto topology drawing ; Complete CLI
    • Support LACP link aggregation, IGMP v3/router port, MLD snooping, DHCP server & DHCP Option82; DHCP Snooping, Port based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH v2/SSL, HTTPS, INGRESS ACL L2/L3,TACACS+, QinQ
    • Enhanced Environmental Monitoring for temp. actual input voltage, current and total power load
    • Optional smart bypass 10GigaT ports in case of power failure, CPU hang (Up to two pairs)
    • IP21 aluminum enclosure
    • Inrush current protection
    • Optional L3Lite or IEC 61375-2-5 TBN features to be upgradable
    • USB port to upload & download the configuration file
    • Dual power input 16.8V~137.5V with galvanic isolation between input power, PoE and system
    • Factory reset pin to restore to factory default setting
    • Wide range operation temperature :-40~70C/-40~158F


L3L - Layer3 Lite IEC 61375-2-5 ETBN EN50155 EN45545-2  Fire & Smoke 10GbE speed Support PXE to verify switch firmware with the latest or certain version on server ITU G.8032 Ring Environmental Monitoring PoE 802.3at/af 30W Wide power input range with isolation FCC CE WEEE RoHS2

SPECIFICATIONS

Hardware Specifications

Standards

IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3an 10Gbase-T
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree
IEEE802.3ad Link Aggregation Control Protocol (LACP)
IEEE802.1AB Link Layer Discovery Protocol (LLDP)
IEEE802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE802.3at/af Power over Ethernet

Switch Architecture

Back-plane (Switching Fabric): 112Gbps

Mac Address

16K MAC address table

Jumbo frame

10KB

Connectors

10/100/1000T: 16 x M12 8-pole X-coded with Auto MDI/MDI-X function
10G Copper: 4x M12 8-pole X-coded ; port 17-20
Power Input connector: 1 x M12 4-pole Male A-coded
Reset/Console/USB : 1 x M12 8-pole A-coded
DIDO: 1 x M12 5-pole A-coded

Network Cable

1000Base-T: 4-pair STP Cat5E/6 cable;
10G Copper: 4-pair STP Cat6a/7 cable

LED

Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green)
10/100/1000T Ethernet port: Link/Activity (Green)
1G/2.5G/5G/10G copper: Link/Act (1G/2.5G/5G: Yellow; 10G: Orange)
PoE : Link/Act (Green) (PoE model)

DI/DO

2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 80 VDC, 50mA

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-40°C~70°C / -40°F~158°F (85°C operation for 10min.)

Storage Temperature

-25°C~85°C / -25°F~185°F

Power Supply

Dual DC input, 16.8VDC~137.5VDC  

PoE Budget (PoE model)

 

Input Range

Power Input

Maximal PoE Budget

16.8~27VDC

Dual Power Input

80W

28~137.5VDC

Single Power Input

80W

 

PoE pin assignment (PoE model)

M12 port #1~#8 (-8 model)
M12 port #1~#8, #19~#20 (-10 model)
M12 port #1~#16 (-16 model)

Support IEEE 802.3at/af End-point, Alternative A mode

Power Consumption

max. 51.2W exclude PoE load

Dimensions

IP21model: Aluminum case
390mm(W)x195mm(H)x105.3mm(D)

Weight

5.1kgs

Installation

Wall Mount Design

EMI & EMS

FCC Part 15 Class A,
EN61000-6-2
EN61000-6-4
CE EN55032 Class A
CE EN55024: CE EN61000-4-2 (ESD) Level 3
CE EN61000-4-3 (RS) Level 3
CE EN61000-4-4 (EFT) Level 3
CE EN61000-4-5 ED3 (Surge) Level 3
CE EN61000-4-6 (CS) Level 3
CE N61000-4-8 (Magnetic field) Level 3

Verifications

EN50155/EN50121-3-2/EN50121-4;
EN 45545-1, EN 45545-2 Fire & Smoke verification

Stability Testing

EN61373 (Shock and Vibration)

MTBF

TBD (standards: IEC 62380)

Warranty

5 years

Bypass**

Up to two pairs Bypass module on 10GT ports to pass to next switch in case of power failure and CPU hang

Software Specifications

Management

SNMP v1 v2c, v3/ Web/Telnet/CLI

SNMP MIB

RFC 1213 MIBII
RFC 1158 MIB
RFC 1157 SNMP MIB
RFC 1493 Bridge MIB*
RFC 1573 IF MIB
RFC 2674 Q-Bridge MIB*
RFC 2819 RMON MIB
Private MIB

ITU G.8032

Support ITU G.8032 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode)
Support basic single ring & enhanced ring
Enhanced G.8032 ring configuration with ease
Cover multicast & data packets protection

PoE Management (PoE model)

PoE Detection to check if PD hangs then restart the PD
PoE scheduling

Per Port PoE Status

On/ Off, voltage, current, watts, temperature

User friendly UI

  1. Auto topology drawing
  2. Topology demo
  3. Complete CLI for professional setting

Port Trunk with LACP

LACP Port Trunk: 8 Trunk groups

LLDP

Supports LLDP to allow switch to advise its identification and capability on the LAN

CDP

Cisco Discovery Protocol for topology mapping

Enhanced Environmental Monitoring

System status for actual input voltage, current, total power load and ambient temperature to be shown in GUI and sent alerting if any abnormal status

VLAN

Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096)
GVRP, QinQ, QoS, Protocol based VLAN; IPv4 Subnet based VLAN

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP

Class of Service

Support IEEE802.1p class of service, per port provides 8 priority queues

Remote Admin

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder

Login Security

Supports IEEE802.1X Authentication/RADIUS

Port Mirror

Support 3 mirroring types: “RX, TX and Both packet”

Network Security

Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
802.1X access control for port based and MAC based authentication/static MAC-Port binding
INGRESS ACL L2/L3
SSL/SSH v2 for Management
HTTPS for secure access to the web interface
TACACS+ for Authentication

IGMP

Support IGMP snooping v1,v2,v3; Supports IGMP static route; 1024 multicast groups; IGMP router port ; IGMP query; GMRP

MLD Snooping

Support IPv6 Multicast stream

Static multicast forwarding

Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application

Bandwidth Control

Support ingress packet filter and egress* packet limit.
The egress* rate control supports all of packet type.
Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet.
The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress* packet limit.

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server

Protection

  1. Miss-wiring avoidance
  2. Node failure protection
  3. Loop protection

SNMP Trap

Up to 5 trap stations; trap types including:

  1. Device cold start
  2. Authorization failure
  3. Port link up/link down
  4. DI/DO open/close
  5. Typology change(ITU ring)
  6. Power failure
  7. Environmental abnormal

PXE

PXE to verify switch firmware with the latest or certain version

DHCP

Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Snooping; DHCP Option 66; basic IPv6 DHCP server

Mac based DHCP Server

Assign IP address by Mac in DHCP network

ECN

Complies with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (ETBN).

Optional L3Lite/L3/ETBN

Lantech OS4 series are optional upgradable to L3 Lite/ L3 or ETBN communication protocols for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter-VLAN routing. Optional ETBN complies with IEC61375-2-5 ETBN for Train Backbone Network.
Detail SPEC upon request.

DNS

Provide DNS client feature and can set Primary and Secondary DNS server

NTP/SNTP

Supports NTP/SNTP to synchronize system clock in Internet

Firmware Update

Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade

Enhanced Storm Control

prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces

Configuration
upload and download

Supports editable configuration file for system quick installation; Support factory reset ping to restore all settings back to factory default;

Diagnostic

Support Ping, ARP table and DDM information

Dual Image Firmware

Support dual image firmware function

*Future release
**Optional

OVERVIEW

Lantech T(P)GS-R6416XT is a high performance OS4 Ethernet switch with 16 10/100/1000T + 4 10G Copper. PoE model has 8/16 or w/10 PoE (incl.8 copper + 2 uplink 10GT copper) 802.3af/at ports which provides advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports enhanced mode with easy configuration. The comprehensive QoS, advanced security including INGRESS ACL L2/L3, TACACS+, SSH v2/SSL and Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port are supported and also required in large network. It also supports 10K Jumbo frames.


Up to 8/10/16(at) PoE at/af ports w/advanced PoE management
Compliant with 802.3af/at standard, the Lantech TPGS-R6416XT is able to feed each PoE port up to 30 Watt at each PoE port for various IP PD devices. Lantech TPGS-R6416XT supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE port can be enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.


Miss-wiring avoidance, Loop protection, Node failure protection
The T(P)GS-R6416XT also embedded several features for strong and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech T(P)GS-R6416XT is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.


Support PXE to verify switch with latest or certain firmware
The switch can check its firmware version during booting time via PXE protocol. If switch finds any newer version, it will upload automatically.


Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5 ETBN
Lantech OS4 Ethernet switches comply with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (ETBN).


Optional L3Lite/L3/ETBN to be upgradable
Lantech OS4 series are optional upgradable to L3 Lite**/ L3** or ETBN** communication protocols for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing. Optional ETBN** complies with IEC61375-2-5 ETBN** for Train Backbone Network.


DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Snooping is supported. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be supported.


User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes T(P)GS-R6416XT much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.


Enhanced G.8032 ring, 8 MSTI MSTP; MRP ring
Lantech T(P)GS-R6416XT features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows RSTP over VLAN for redundant links with 8 MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks.


QinQ, QoS and GVRP supported
It supports the QinQ, QoS, GVRP for large VLAN segmentation.


IGMPv3, GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD snooping and static multicast forwarding binding by ports for video surveillance application.


Enhanced Storm Control
Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces and the detection is more precise and reaction is more efficient.


Protocol based VLAN; Subnet based VLAN
The protocol-based VLAN processes traffic based on protocol. It filters IP traffic from nearby end-stations using a particular protocol such as IP, IPX, ARP or other Ethernet-types in a Hex value. Subnet based VLANs group traffics into logical VLANs based on the source IP address and IP subnet. The above features can help to build VLAN in the network mixed with managed and un-managed switch as to define packets to which VLAN group based on protocol or subnet.


Editable configuration file; USB port for upload/download configuration
The configuration file of Lantech T(P)GS-R6416XT can be exported and edited with word processor for the following switches to configure with ease.


The USB port can upload/download the configuration from/to USB dongle.


Event log & message; 2DI + 2DO; Factory default pin
T(P)GS-R6416XT provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the outside alarm and switch will send alert information to IP network with email and traps.


The factory reset pin can restore the setting back to factory default.


Enhanced Environmental monitoring for Ethernet switch inside information
The enhanced environmental monitoring can detect switch overall temperature, actual input voltage and current. It also can send the SNMP traps and email** when abnormal.


Optional smart bypass protection on dual 10G copper ports**
The bypass relay is set to bypass the switch to the next one when power is off to prevent network disruption. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. Optional smart bypass (Up to two pairs) can be activated when switch encounters power failure or CPU hang. (-BT/-BBT model)


Dual WV input with max PoE budget and Inrush current protection
The T(P)GS-R6416XT WVI model accepts 16.8~137.5VDC dual input with galvanic protection and PoE model can feed 54V output for PoE feeding with 80W budget. A voltage which can be minimal 0,5 Un nominal voltage (when Vin≧36V) and/or a voltage which can be maximal 1,5 Un nominal voltage for more than 1000 consecutive ms (one second). The inrush current on initial power up can be limited lower than 10 x nominal current and for less than 1ms.


EN50155, EN45545-2; EN61373 compliance; High ESD protection
T(P)GS-R6416XT passed serious tests under extensive Industrial EMI and Safety standards. With EN45545-2 Fire & Smoke and EN50155 verification, the T(P)GS-R6416XT is best switch for railway on-board/track side, vehicle and mining applications. For more usage flexibilities, T(P)GS-R6416XT supports wide operating temperature from -40°C to 70°C. (85°C operation for 10min.)


*Future release
**Optional

FEATURES

  • 16 10/100/1000T X-coded + 4 10G Copper X-coded (Total 20 Ports Switch)
  • PoE model: w/8/16 or w/10 (incl. 8 Copper + 2 uplink 10GT copper) PoE 802.3af/at ports
  • PoE model: Embedded up to 8/10(incl. 8 copper + 2 10GT)/16 PoE IEEE802.3af/at ports to feed power up to 30W for active mode operation (PoE budget 80W)
  • Dual WV input (16.8V~137.5VDC)
  • Galvanic isolation from power input/Ethernet ports to system 1.5KV
  • PoE model: PoE management including PoE detection and scheduling for PD (power devices)
  • Back-plane (Switching Fabric): 112Gbps
  • 16K MAC address table
  • 10KB Jumbo frame
  • User friendly UI, auto topology drawing, topology demo, complete CLI for professional setting
  • Enhanced G.8032 Ring protection in 20ms for single ring
    • Support various ring/chain topologies, including enhanced ring & basic ring
    • Enhanced G.8032 ring configuration with ease
    • Cover multicast and data packets protection
  • Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
  • IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy with 8 MSTI
  • 4K 802.1Q VLAN, Port based VLAN, GVRP, QinQ, QoS
  • Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console
  • Subnet VLAN and protocol VLAN
  • Support PXE to verify switch firmware with the latest or certain version
  • DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server; Port based DHCP server; DHCP Snooping; DHCP Option 66; basic IPv6 DHCP server
  • Mac based DHCP server to assign IP address in DHCP network
  • Bandwidth Control
    • Ingress packet filter and egress* rate limit
    • Broadcast/multicast packet filter control
  • Miss-wiring avoidance
    • LED indicator
  • Node failure protection
    • Ensure the switches in a ring to survive after power breakout is back
    • The status can be shown in NMS when each switch is back
  • System Event Log, SMTP alert and SNMP Trap for alarm support
  • Security
    • SSL/SSH v2/INGRESS ACL L2/L3
    • Mac address table: MAC address entries/Filter/static MAC-Port binding
    • Remote Admin: IP address security management to prevent unauthorized intruder.
    • TACACS+
    • Login Security: IEEE802.1X/RADIUS
    • HTTPS for secure access to the web interface
  • Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application
  • IGMP router port for multicast protection
  • IGMPv1,v2,v3 with Query mode for multi media
  • MLD Snooping for IPv6 Multicast stream
  • Dual image firmware support
  • Factory reset pin to restore setting to factory default
  • Diagnostic including Ping / ARP table / DDM information
  • Enhanced Environmental Monitoring for temp., actual input voltage, current & total power load
  • Supports 2DI/2DO (Digital Input/Digital Output)
  • Configuration backup and restoration
    • Supports editable configuration file for system quick installation
    • USB port for upload/download the config
  • TFTP/HTTP firmware upgrade
  • Enhanced Storm Control
  • Optional smart bypass (Up to two pairs) (-BT/-BBT model)
  • Inrush current protection
  • Wide operation temperature: -40C~70C/-40F~158F (85°C operation for 10min.)
  • EN45545-2 Fire & Smoke, EN50155 and EN61373 shock/vibration verification
  • Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5 ETBN
  • Optional L3Lite/L3/ETBN to be upgradable
  • IP21 aluminum housing with wall mount design
*Future release
**Optional

Sản phẩm khác

  • T(P)GS-R6804XT (IP54)

    T(P)GS-R6804XT (IP54)

    T(P)GS-R6804XT (IP54)

    4 x 1G/2.5G + 8 x10G Copper (w/ PoE), EN50155 OS4 Managed Ethernet Switch w/ Enhanced G.8032 Ring, PXE ; WVI input
  • T(P)GS-R6616XFT

    T(P)GS-R6616XFT

    T(P)GS-R6616XFT

    16 10/100/1000T + 4 10G Copper + 2 10G SR/LR Fiber Q-ODC OM3 (w/8/10/12/16 PoE), EN50155 OS4 Managed Ethernet Switch w/ Enhanced G.8032 Ring, PXE ; WVI input
  • T(P)GS-R6616XT

    T(P)GS-R6616XT

    T(P)GS-R6616XT

    16 10/100/1000T + 6 10G Copper (with 8/10/12/16 PoE), EN50155 OS4 Managed Ethernet Switch w/ Enhanced G.8032 Ring, PXE ; WVI inpu