PCS-924 Stub Differential Relay

Model: PCS-924

In one-and-a-half breaker and ring breaker arrangements, the T-zone exists between two breakers and line/transformer feeders.


  • In one-and-a-half breaker and ring breaker arrangements, the T-zone exists between two breakers and line/transformer feeders. The PCS-924 is designed to provide current differential protection, sum-of-current protection and feeder end fault protection for the T-zone.
  • It provides three groups of CT input for direct connections to three terminal CTs. The disconnector is always installed in the feeder to facilitate the maintenance.
  • The relay considers the different operating scenarios for the feeder with the disconnector. 3-terminal and 2-terminal current differential protections are automatically enabled/ disabled to meet different scenarios with closed or opened disconnector. The feeder end fault protection is enabled when the disconnector is opened.
  • It is used to clear faults between CT and disconnector while keeping continuous operation of local breakers. The phase overcurrent protection employs the calculated sum current of two CTs. It can be applied for feeder energization and feeder backup protection.
  • The PCS-924 is compatible with IEC 61850 station bus and process bus applications. It supports IEC 61850-8-1 MMS, GOOSE and IEC 61850-9-2 Sampling Value. The RJ-45 faceplate port is provided for testing and setting, allowing for easier commissioning and maintenance.
  • Current differential protection (87S) The switchover of 3-terminal and 2-terminal current differential protection can be automatically implemented according to the open/close state of feeder disconnector. Two stage feeder end fault protection (50FLE)
  • This protection is only valid when the feeder disconnector is opened. It is used to clear the faults between CT and the opened disconnector.
  • It will send a transfer trip command to remote end and keep the local breakers in service. Sum overcurrent protection (50P) Phase overcurrent protection is based on the summed current of two CTs.
  • It can be used as the energizing protection or feeder backup protection.
  • Current drift auto adjustment The relay continually and automatically traces the voltage and current drifts and adjusts the zero point to acquire accurate measurements.

Sản phẩm khác

  • SWT 3000- teleprotection

    SWT 3000- teleprotection

    SWT 3000

    The SWT 3000 Teleprotection system is the proven worldwide solution for identifying and isolating faults extremely quickly in the high-voltage grid.  
  • Distance Protection Relay -SIPROTEC 7SA82

    Distance Protection Relay -SIPROTEC 7SA82

    SIPROTEC 7SA82

    The distance protection relay SIPROTEC 7SA82 is part of the new SIPROTEC 5 series of modular field devices.
  • Differential protection relay SIPROTEC 7SD82

    Differential protection relay SIPROTEC 7SD82

    SIPROTEC 7SD82

    The line differential protection relay SIPROTEC 7SD82 is part of the new SIPROTEC 5 series of modular field devices.
  • SEL-311L Line Current Differential Protection and Automation System

    SEL-311L Line Current Differential Protection and Automation System

    SEL-311L

    Line Current Differential Protection and Automation System Use the SEL-311L Line Current Differential Relay with integral four-zone distance backup for easy-to-apply, high-speed line protection.
  • SEL-311C Transmission Protection System

    SEL-311C Transmission Protection System

    SEL-311C

    Transmission Protection System Apply the SEL-311C Relay for protection, reclosing, monitoring, and control of transmission lines.
  • SEL-387L Line Current Differential Relay

    SEL-387L Line Current Differential Relay

    SEL-387L

    Protect two-terminal transmission and subtransmission lines with the same ratio CTs on each end. Apply a 64 kbps digital communications channel for complete phase and ground fault protection with simple settings.
  • TPU-1 – Universal Terminal

    TPU-1 – Universal Terminal

    TPU-1

      Complies with IEC 60834-1 and IEC TS 61000-6-5 standards. Complies with ANSI IEEE C37.90.1 and
 ANSI IEEE C37.90.2 standards. Compatible with IEC 61850 standard.  
  • CTP-1 – Compact Terminal

    CTP-1 – Compact Terminal

    CTP-1

      Complies with IEC 60834-1 and IEC TS 61000-6-5 standards. Complies with ANSI IEEE C37.90.1 and
 ANSI IEEE C37.90.2 standards. Channel: analog or digital with electric or optic interfac  
  • PCS-902 Line Distance Protection

    PCS-902 Line Distance Protection

    PCS-902

    The PCS-902 provides comprehensive protection and control solutions for transmission lines with high-speed sub-cycle distance element.