OVERVIEW
Lantech I(P)GS-L6408XSFP is a high performance OS3 Industrial Ethernet switch with 8 10/100/1000T + 4 1G/2.5G/10G auto sensing SFP+ (w/8 802.3at/af PoE ports) which provides advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports enhanced mode with easy configuration. The comprehensive QoS, advanced security including INGRESS ACL 2/L3, TACACS+, SSH v2/SSL and Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port are supported and are also required in large network. It also supports10K Jumbo frames.
Up to 8 PoE 802.3at/af ports w/advanced PoE management (PoE model)
Compliant with 802.3at/af standard, the Lantech IPGS-L6408XSFP being able to feed each PoE port up to 30 Watt at each PoE port for various IP PD devices. Lantech IPGS-L6408XSFP supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE port can be Enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.
Miss-wiring avoidance, Node failure protection, Loop protection
The I(P)GS-L6408XSFP also embedded several features for strong and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech I(P)GS-L6408XSFP being able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the Ethernet switches in a ring to survive after power breakout is back. The status can be shown in NMS when each Ethernet switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Snooping is supported. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Basic IPv6 DHCP service can be supported.
Support PXE to verify switch firmware with the latest or certain version
The switch can check its firmware version during booting time via PXE protocol. If switch finds any newer version, it will upload automatically.
User friendly GUI, Auto topology drawing
The user-friendly UI, innovative auto topology drawing and topology demo makes I(P)GS-L6408XSFP much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Enhanced G.8032 ring, 8 MSTI MSTP; MRP ring
Lantech I(P)GS-L6408XSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows RSTP over VLAN for redundant links with 8 MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
Enhanced Storm control
Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces and the detection is more precise and reaction is more efficient.
Optional L3Lite/L3* to be upgradable
Lantech OS3 is optional upgradable to L3 Lite for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing.
QinQ, QoS and GVRP supported
It supports the QinQ, QoS and GVRP for large VLAN segmentation.
Protocol based VLAN; Subnet based VLAN
The protocol-based VLAN processes traffic based on protocol. It filters IP traffic from nearby end-stations using a particular protocol such as IP, IPX, ARP or other Ethernet-types in a Hex value. Subnet based VLANs group traffics into logical VLANs based on the source IP address and IP subnet. The above features can help to build VLAN in the network mixed with managed and un-managed switch as to define packets to which VLAN group based on protocol or subnet.
IGMPv3, GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD snooping and static multicast forwarding binding by ports for video surveillance application.
Editable configuration file; USB port for upload/download configuration
The configuration file of Lantech I(P)GS-L6408XSFP can be exported and edited with word processor for the following Ethernet switches to configure with ease. The USB port can upload/download the configuration from/to USB dongle.
Event log & message; 2 DI + 2 DO; Factory default pin
I(P)GS-L6408XSFP provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the outside alarm and switch will send alert information to IP network with email and traps. The factory reset pin can restore the setting back to factory default.
Enhanced environmental monitoring for switch inside information
The enhanced environmental monitoring can detect switch overall temperature, total power load, actual input voltage and current it also can send the SNMP traps alert when abnormal.
Dual power 24V/48V input with max budget
The Lantech IPGS-L6408MXSFP is designed with dual power supply at 44~56VDC (48V model) or 12V~57VDC input (24V model). The 48V model can have 240W PoE budget while 24V model can have 120W (24V input) budget. The Lantech IGS-L6408MXSFP is designed with dual power supply at 12V~57VDC input (24V model). A voltage which can be minimal 0,5 Un nominal voltage (when Vin≧36V) and/or a voltage which can be maximal 1,5 Un nominal voltage for more than 1000 consecutive ms (one second).
Industrial hardened design with high EFT and ESD protection
Lantech I(P)GS-L6408MXSFP features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. Featured with relay contact alarm function, the I(P)GS-L6408XSFP being able to connect with alarm system in case of power failure or port disconnection. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory applications. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
SPECIFICATIONS
Hardware Specifications
Standards
|
IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree IEEE802.1s Multiple Spanning Tree IEEE802.3ad Link Aggregation Control Protocol (LACP) IEEE802.1AB Link Layer Discovery Protocol (LLDP) IEEE802.1X User Authentication (Radius) IEEE802.1p Class of Service IEEE802.1Q VLAN Tag
|
Switch Architecture
|
Back-plane (Switching Fabric): 96Gbps
|
Mac Address
|
16K MAC address table
|
Jumbo frame
|
10KB
|
Connectors
|
10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function Mini-GBIC: 4 x 1G/2.5G/10G SFP socket with DDMI RS-232 connector: RJ-45 type USB x 1 Power & Relay connector: 1 x 6-pole terminal block DIDO: 1 x 6-pole terminal block
|
Network Cable
|
100Base-TX: 2-pair STP Cat. 5/ 5E/ 6 cable; EIA/TIA-568 100-ohm (100m) 1000Base-T: 4-pair STP Cat5E/6 cable; 10GBaseT:4-pair STP Cat6/6A/7 cable
|
Optical Cable
|
1Gbps: Multi-mode: 0 to 550 m, 850 nm (50/125 μm); 0 to 2 km, 1310 nm (50/125 μm) Single-mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm (9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 nm (9/125 μm) 2.5Gbps Multi-mode: 0 to 300 m, 850 nm (50/125 μm); Single mode: 0 to 2 km/ 15 km/ 40 km, 1310 nm (9/125 μm); 0 to 40 km/ 80 km/ 100km, 1550 nm (9/125 μm) WDM 1Gbps: Single-mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm); 0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm) WDM 2.5Gbps Single-mode: 0 to 5 km/ 20 km/ 40 km/ 60 km, 1310 /1550nm (9/125 μm); 0 to 80 km, 1490/1550 nm (9/125 μm) 10Gbps Multi-mode: 0 to 300 m, 850 nm (OM3 50/125 μm); Single mode: 0 to 10 km/ 20 km, 1310 nm (9/125 μm); 0 to 40 km/ 80km/ 100 km, 1550 nm (9/125 μm) WDM 10Gbps Single-mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1270/1330 nm (9/125 μm); 0 to 80km, 1490/1550 nm (9/125 μm)
|
LED
|
Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green) 10/100/1000T Ethernet port: Link/Activity (Green) 1G/2.5G/10G fiber: Link/Act (Orange) PoE: Link/Act (Green, PoE model)
|
DI/DO
|
2 Digital Input (DI): Level 0: -30~2V / Level 1: 10~30V Max. input current:8mA 2 Digital Output (DO): Open collector to 40 VDC, 200mA
|
PoE Budget (PoE model)
|
240W for 44~56V input (48V model) 120W at 24V input (24V model)
|
PoE pin assignment (PoE model)
|
RJ-45 port # 1~#8 support IEEE 802.3at/af End-point, Alternative A mode. Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6.
|
Operating Humidity
|
5% ~ 95% (Non-condensing)
|
Operating Temperature
|
-20°C~60°C / -40°F~140°F (Standard model) -40°C~75°C / -40°F~167°F (-E model)
|
Storage Temperature
|
-40°C~85°C / -40°F~185°F
|
Power Supply
|
Dual DC input, 44~56V (48V model); Dual DC input, 12V~57V; Dual DC input 16V~57V when using 10G copper (24V model)
|
Power Consumption
|
Max. 33.6W exclude PoE load
|
Case Dimension
|
Metal case. IP-30, IPGS-L6408XSFP 95.84 (W) x 135 (D) x 163 (H) mm IGS-L6408XSFP 74 (W) x 135 (D) x 163 (H) mm
|
Weight
|
3.6kgs
|
Installation
|
Wall Mount Design
|
EMI & EMS
|
FCC Class A, CE EN55032 Class A, CE EN55024, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8, CE EN61000-6-2, CE EN61000-6-4
|
Stability Testing
|
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
|
MTBF
|
TBC (standards: IEC 62380)
|
Warranty
|
5 years
|
Software Specifications
Management
|
SNMP v1 v2c, v3/ Web/Telnet/CLI
|
SNMP MIB
|
RFC 1213 MIBII RFC 1158 MIB RFC 1157 SNMP MIB RFC 1493 Bridge MIB* RFC 1573 IF MIB RFC 2674 Q-Bridge MIB* RFC 2819 RMON MIB Private MIB
|
PoE Management
|
PoE Detection to check if PD hangs then restart the PD PoE scheduling
|
Per Port PoE Status
|
On/ Off, voltage, current, watts, temperature
|
ITU G.8032
|
Support ITU G.8032 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode) Support basic single ring & enhanced ring Enhanced G.8032 ring configuration with ease Cover multicast & data packets protection
|
User friendly UI
|
- Auto topology drawing
- Topology demo
- Complete CLI for professional setting
|
Port Trunk with LACP
|
LACP Port Trunk: 8 Trunk groups
|
LLDP
|
Supports LLDP to allow switch to advise its identification and capability on the LAN
|
CDP
|
Cisco Discovery Protocol for topology mapping
|
Environmental Monitoring
|
System status for actual input voltage, current ambient temperature and total power load to be shown in GUI and sent alerting if any abnormal status
|
VLAN
|
Port Based VLAN IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096) GVRP, QinQ, QoS Protocol based VLAN IPv4 Subnet based VLAN
|
Spanning Tree
|
Supports IEEE802.1d Spanning Tree** and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI
|
Quality of Service
|
The quality of service determined by IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP
|
Class of Service
|
Support IEEE802.1p class of service, per port provides 8 priority queues
|
Remote Admin
|
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder
|
Login Security
|
Supports IEEE802.1X Authentication/RADIUS
|
Port Mirror
|
Support 3 mirroring types: “RX, TX and Both packet”
|
Network Security
|
Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. 802.1X access control for port based and MAC based authentication/static MAC-Port binding Ingress ACL L2/L3 SSL/SSH v2 for Management HTTPS for secure access to the web interface TACACS+ for Authentication
|
IGMP
|
Support IGMP snooping v1, v2, v3; Supports IGMP static route; 1024 multicast groups; IGMP router port; IGMP query; GMRP
|
MLD Snooping
|
Support IPv6 Multicast stream
|
Static multicast forwarding
|
Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application
|
Bandwidth Control
|
Support ingress packet filter and egress* packet limit. The egress* rate control supports all of packet type. Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet. The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress* packet limit.
|
Flow Control
|
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
|
System Log
|
Supports System log record and remote system log server
|
Protection
|
- Miss-wiring avoidance
- Node failure protection
- Loop protection
|
SNMP Trap
|
Up to 5 trap stations; trap types including:
- Device cold start
- Authorization failure
- Port link up/link down
- DI/DO open/close
- Typology change (ITU ring)
- Power failure
- Environmental abnormal
|
PXE
|
PXE to verify switch firmware with the latest or certain version
|
DHCP
|
Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Option 66; DHCP Snooping, Basic IPv6 DHCP server
|
Mac based DHCP Server
|
Assign IP address by Mac that can include dumb switch in DHCP network
|
DNS
|
Provide DNS client feature and can set Primary and Secondary DNS server
|
SNTP
|
Supports NTP/SNTP to synchronize system clock in Internet
|
Firmware Update
|
Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade
|
Configuration upload and download
|
Supports editable configuration file for system quick installation; Support factory reset button to restore all settings back to factory default
|
Enhanced Storm Control
|
prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces
|
Optional L3Lite/L3*
|
Lantech OS3 is optional upgradable to L3 Lite/L3* for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing.
|
Diagnostic
|
Support Ping, ARP table and DDM information
|
Dual Image Firmware
|
Support dual image firmware function
|