3 10/100/1000TX + 3 Dual Speed SFP Combo IEC 62439-3 Zero Recovery Time Managed PRP/HSR Redundancy Box w/One step PTP & Built-in MMS Server for Data Modeling

Model: IRX-3303C-PT

3 10/100/1000TX + 3 Dual Speed SFP Combo IEC 62439-3 Zero Recovery Time Managed PRP/HSR Redundancy Box w/One step PTP & Built-in MMS Server for Data Modeling

 


3 10/100/1000TX + 3 Dual Speed SFP Combo IEC 62439-3 Zero Recovery Time Managed PRP/HSR Redundancy Box w/One step PTP & Built-in MMS Server for Data Modeling

    • Compliant with IEC61850-3 & IEEE1613
    • Compatible with IEC 62439-3 Clause 5“High-availability Seamless Redundancy (HSR)”
    • Compatible with IEC 62439-3 Clause 4”Parallel Redundancy Protocol (PRP)”
    • Support PRP/HSR coupling with Quadbox architecture
    • Built-in MMS server based on IEC61850-90-4 switch data modeling for power SCADA
    • Support One-step PTP IEEE 1588 v2 w/transparent clock


OVERVIEW

Lantech IRX-3303C-PT is an IEC 62439-3 zero recovery time managed PRP/HSR redundancy box with 3 10/100/1000TX + 3 Dual Speed SFP Combo which meets the IEC-61850-3 & IEEE 1613 Standards.

Support IEC61850-90-4 switch data modeling with built-in MMS server
Lantech IRX-3303C-PT embeds a MMS server based on IEC61850-90-4 switch data modeling for power SCADA that allow power SCADA to control and monitor the switch without additional NMS.

Support IEC61850-90-4 switch data modeling with built-in MMS server
Lantech IRX-3303C-PT embeds a MMS server based on IEC61850-90-4 switch data modeling for power SCADA that allow power SCADA to control and monitor the switch without additional NMS.

Compliant with IEC61850-3, IEEE1613 and IEC62439-3
Follow standard IEC 62439-3, supports High-availability Seamless Redundancy (HSR) and the Parallel Redundancy Protocol (PRP) to provide the ultimate in network reliability and zero failover time from network faults. All the ports support copper triple-speed (10Mbps/100Mbps/1Gbps) or fiber dual speed (100M/Giga) and the internal wire-speed forwarding capability makes it one of the best performing HSR/PRP solutions in the market.

FEATURES

  • 3 Dual Speed SFP + 3 10/100/1000TX Combo
    1. Compliant with IEC61850-3 and IEEE 1613
    2. Supports DIDO (2Digital Input/2 Digital Output)
    3. IP30 metal housing with DIN rail and Wall Mount** design
    4. Dual DC input from 12V~56VDC, HV model with one 90~305VAC / 120~430VDC power input
    5. Support IEC 61850 over MMS (TCP/IP Ethernet)
      • Provide .cid file type
      • Solicited data access through Manufacturing Message Specification (MMS) Read and Write requests
      • Unsolicited data through MMS Information Reports
    6. Compatible with IEC 62439-3 Clause 5 “High-availability Seamless Redundancy (HSR)”
    7. Compatible with IEC 62439-3 Clause 4 ”Parallel Redundancy Protocol (PRP)”
    8. HSR RedBox, HSR /PRP QuadBox for coupling, PRP RedBox support
    9. Zero recovery time from network failures
    10. Triple-speed (10Mbps/100Mbps/1Gbps), full-duplex operation on all ports
    11. Ethernet packet forwarding at wire-speed, non-blocking
    12. All of the ports can be either copper or fiber Ethernet interfaces
    13. Time and frequency synchronization using IEEE1588-v2 One step PTP with transparent clock
    14. Guaranteed behavior under failure conditions
    15. High availability network using simultaneous transmission over two Ethernet ports
    16. Efficient elimination of duplicated packets at hardware level
    17. Wide operating temp. -40°C to 75°C
    18. Wide-range high-voltage AC/DC power supply
    19. SSH/SSL encryption
    20. Web-based, Telnet, CLI

SPECIFICATIONS

Hardware Specifications

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet / Gigabit Fiber port

CPU

Marvell 925Mhz

RAM

64M Byte

Flash

1G Byte

Connectors

Combo 10/100/1000T: 3 x RJ-45 type connector
Combo Mini-GBIC: 3 x Dual Speed SFP Sockets
Power & P-Fail connector: 1 x 6-pole terminal block
RS-232 connector: 1 x RJ-45 type connector

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)

Optical Cable

Multi-mode: 50/125um~62.5/125um; Single mode: 9/125um
Wavelength: 850nm (Multi-mode) / 1310nm (Single-mode)

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), Alarm (Red), Quad mode, HSR
Ethernet port: Link/Activity (Green), Speed (Green); Mini-GBIC: Link/Activity (Green)

DI/DO

2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Power Supply

LV: 12 to 56 VDC dual input
HV: 90-305VAC or 120-430VDC one power supply

Case Dimension

Metal case. IP-30,
74 (W) x 135 (D) x 152 (H) mm

Weight

900 g

Installation

DIN Rail and Wall Mount** Design

EMI & EMS

FCC Class A,
CE EN55022 Class A, CE EN55024, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE N61000-4-8

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)

Warranty

5 years

Software Specifications

Management

HTTP graphical web-based
Telnet, VT100
Command Line Interface (CLI)
SSH/SFTP (128-bit encryption)
SNMP v1, v2c, v3 (56-bit encryption)
RADIUS client

SNMP MIB

RFC1493-BRIDGE-MIB
RFC1907-SNMPv2-MIB
RFC2012-TCP-MIB
RFC2013-UDP-MIB
RFC2578-SNMPv2-SMI
RFC2579-SNMPv2-TC
RFC2863-IF-MIB
IANAifType-MIB

MMS for data modeling

IEC 61850 over MMS (TCP/IP Ethernet)
Provide .cid file type
Solicited data access through MMS read and write requests
Unsolicited data access through MMS information reports
*Future Release
**Optional
 

Sản phẩm khác