16 10/100/1000T + 4 10G Copper + 2 10G SR/LR Fiber Q-ODC OM3 (w/8/10/12/16 PoE), EN50155 OS4 Managed Ethernet Switch w/ Enhanced G.8032 Ring, PXE ; WVI input
- Total 16 port 10/100/1000T + 4 10G Copper + 2 10G Q-ODC OM3 Fiber Ethernet Switch
- PoE model: w/8/10/12 (8 copper + 2/4 uplink 10GT copper PoE ports) or 16 PoE ports
- PoE model: Support IEEE802.3at/af up to 30W per port; PoE management incl. Detection and Scheduling
- Support PXE to verify switch firmware with the latest or certain version on server
- Enhanced G.8032 ring protection < 20ms for single ring. Supports enhanced mode and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 8 MSTI /RSTP; support MRP ring
- Miss-wiring avoidance & node failure protection
- User friendly UI, including auto topology drawing ; Complete CLI
- Support LACP link aggregation, IGMP v3/router port, MLD snooping, DHCP server & DHCP Option82; DHCP Snooping, Port based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH v2/SSL, HTTPS, INGRESS ACL L2/L3,TACACS+, QinQ
- Protocol based VLAN ; IPv4 Subnet based VLAN
- Enhanced Environmental Monitoring for temp. actual input voltage, current and total power load
- IP21 aluminum enclosure
- Inrush current protection
- Optional smart bypass 10GigaT ports in case of power failure, CPU hang (up to two pairs copper bypass and one pair fiber bypass)
- Optional L3Lite or IEC 61375-2-5 TBN features to be upgradable
- USB port to upload & download the configuration file
- Dual power input 16.8V~137.5V with galvanic isolation between input power, PoE and system
- Factory reset pin to restore to factory default setting
- Wide range operation temperature : -40C~70C/-40F~158F
SPECIFICATIONS
Hardware Specifications
Standards |
IEEE802.3 10Base-T Ethernet |
|||||||||
Switch Architecture |
Back-plane (Switching Fabric): 152Gbps |
|||||||||
Mac Address |
16K MAC address table |
|||||||||
Jumbo frame |
10KB |
|||||||||
Connectors |
10/100/1000T: 16 x M12 8-pole X-coded with Auto MDI/MDI-X function |
|||||||||
Network Cable |
1000Base-T: 4-pair STP Cat5E/6 cable; |
|||||||||
LED |
Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green) |
|||||||||
DI/DO |
2 Digital Input (DI) : |
|||||||||
Operating Humidity |
5% ~ 95% (Non-condensing) |
|||||||||
Operating Temperature |
-40°C~70°C / -40°F~158°F (85°C operation for 10min.) |
|||||||||
Storage Temperature |
-40°C~85°C / -40°F~185°F |
|||||||||
Power Supply |
Dual DC input, 16.8VDC~137.5VDC |
|||||||||
PoE Budget (PoE model) |
|
|||||||||
PoE pin assignment (PoE model) |
M12 port #1~#8 (-8 model) Support IEEE 802.3at/af End-point, Alternative A mode |
|||||||||
Power Consumption |
Max. 54.4W exclude PoE load |
|||||||||
Dimensions |
IP21 model: Aluminum case |
|||||||||
Weight |
5.15 kgs |
|||||||||
Installation |
Wall Mount Design |
|||||||||
EMI & EMS |
FCC Part 15 Class A, |
|||||||||
Verifications |
EN50155/EN50121-3-2/EN50121-4; |
|||||||||
Stability Testing |
EN61373 (Shock and Vibration) |
|||||||||
MTBF |
298,559 hrs (standards: IEC 62380) |
|||||||||
Bypass** |
Up to two pairs copper and one pair fiber bypass on 10GT Copper ports and 10GT Fiber Q-ODC ports to pass to next switch in case of power failure and CPU hang |
|||||||||
Warranty |
5 years |
Software Specifications
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI |
SNMP MIB |
RFC 1213 MIBII |
ITU G.8032 |
Support ITU G.8032 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode) |
PoE Management (PoE model) |
PoE Detection to check if PD hangs then restart the PD |
Per Port PoE Status |
On/ Off, voltage, current, watts, temperature |
User friendly UI |
|
Port Trunk with LACP |
LACP Port Trunk: 8 Trunk groups |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
CDP |
Cisco Discovery Protocol for topology mapping |
Enhanced Environmental Monitoring |
System status for actual input voltage, current, total power load and ambient temperature to be shown in GUI and sent alerting if any abnormal status |
VLAN |
Port Based VLAN |
Spanning Tree |
Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points – DSCP |
Class of Service |
Support IEEE802.1p class of service, per port provides 8 priority queues |
Remote Admin |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder |
Login Security |
Supports IEEE802.1X Authentication/RADIUS |
Port Mirror |
Support 3 mirroring types: “RX, TX and Both packet” |
Network Security |
Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
IGMP |
Support IGMP snooping v1,v2,v3; Supports; 1024 multicast groups; IGMP router port ; IGMP query; GMRP |
MLD Snooping |
Support IPv6 Multicast stream |
Static multicast forwarding |
Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application |
Bandwidth Control |
Support ingress packet filter and egress* packet limit. |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Supports System log record and remote system log server |
Protection |
|
SNMP Trap |
Up to 5 trap stations; trap types including:
|
PXE |
PXE to verify switch firmware with the latest or certain version |
DHCP |
Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Snooping; DHCP Option 66; basic IPv6 DHCP server |
Mac based DHCP Server |
Assign IP address by Mac in DHCP network |
ECN |
Complies with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (ETBN). |
Optional L3Lite/L3/ETBN |
Lantech OS4 series are optional upgradable to L3 Lite/ L3 or ETBN communication protocols for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter-VLAN routing. Optional ETBN complies with IEC61375-2-5 ETBN for Train Backbone Network. |
DNS |
Provide DNS client feature and can set Primary and Secondary DNS server |
NTP/SNTP |
Supports NTP/SNTP to synchronize system clock in Internet |
Firmware Update |
Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade |
Enhanced Storm Control |
prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces |
Configuration |
Supports editable configuration file for system quick installation; Support factory reset pin to restore all settings back to factory default |
Diagnostic |
Support Ping, ARP table and DDM information |
Dual Image Firmware |
Support dual image firmware function |