Fiber optic G.703 64kbps codir converter

Model: Article Number: 21-180

The 21-180 is a synchronous 64kbps modem for codirectional clock environments that can be used to extend the reach of balanced G.703 nts


The 21-180 is a synchronous 64kbps modem for codirectional clock environments that can be used to extend the reach of balanced G.703 interfaces up to 2km allowing for a cost effective transmission without electromagnetic interference and signal degradation.
The modem can use the incoming clock from the G.703 interface and propagate it down the fiber or use its internal clock source running at PDH accuracy. The modems automatic clock phase adjustment accommodates for any fiber round trip delay.

The 21-180, Fiber optic G.703 64kbps codir converter is intended to extend distance and to provide galvanic isolation for disturbance free insertion of 64kbps data into SDH/PDH – multipliers.
The converter is compatible with the FOT module in ABB’s tele protection terminals 550/560 for connecting the terminals to higher order networks.

Fiber optic G.703 64kbps
Codirectional

The ITU-standard “G.703 64kbit/s codirectional interface” describes a galvanic interface.
This interface is commonly used by tele protection equipment for connection to telecom multiplexers.
The 21-170 converts the codirectional interface signals to a proprietary fiber optic protocol used for example by tele protection equipment from ABB.

G.703/704 E1

Unbalanced

The ITU-standard G.703 describes the physical and electrical characteristics of hierarchical digital interfaces at rates up to 140 Mbps.

G.704 describes frame structures on G.703 interfaces up to 45 Mbps.
E1 describes a galvanic G.703 interface with G.704 frames at 2048 kbps commonly used in telecommunication.

 

Others

  • O9400R SDH/SONET ADM/TM

    O9400R SDH/SONET ADM/TM

    O9400R

    The Loop-O9400R STM-1/4/16 (OC-3/12/48) is a standards-compliant high density SDH/SONET ADM/TM with a full T1/E1 cross-connect rack system. Data sheet
  • SDH / SONET Integrated Access MUX - O9550R-C

    SDH / SONET Integrated Access MUX - O9550R-C

    O9550R-C

    Per chassis single STM-1/4 (OC-3/12) optical ring uplinks Up to four STM-1/4 (OC-3/12) aggregate lines that are software configurable Capacity for 5 single slots and 4 mini plug-in slots Non-blocking N x 64 Kbps for 252 E1 or 336 T1 for data and voice channel transmission for uplink site Maximum of 36 E1 or 24 T1 in the tributary interfaces
  • Loop-O9100 ADM/TM

    Loop-O9100 ADM/TM

    Loop-O9100

    The Loop-O9100 ADM/TM is an economic, compact STM1 ADM & TM Multiplexer designed to add and drop up to the following:  
  • O9400S SDH/SONET ADM/TM

    O9400S SDH/SONET ADM/TM

    O9400S

    SDH / SONET multiplexer ADM / TM - O9400S The Loop-O9400S ADM/TM is a compact, economic STM1/4 (OC-3/12) ADM & TM multiplexer.
  • SCADA Data Gateway

    SCADA Data Gateway

    SCADA Data Gateway

    The SCADA Data Gateway (SDG) is a Windows™ application used by System Integrators and Utilities to collect data from OPC, IEC 60870-6 (TASE.2/ICCP), IEC 61850, IEC 60870-5, DNP3, or Modbus Server/Slave devices and then supplies this data to other control systems supporting OPC, IEC 60870-6 (TASE.2/ICCP) Cl
  • Modem Scada TD-36 485 LV

    Modem Scada TD-36 485 LV

    TD-36 485 LV

    • Traditional AT command modem with 2/4-wire lease line support• Up to 11 bit RS-232/RS-422/485 to 115.2 kbit/s• V34 with fast connect, V32bis, V22bis, V23HDX/FDX +multidrop support
  • AM3440-B Access DCS-MUX

    AM3440-B Access DCS-MUX

    AM3440-B

    The AM3440-B is the smallest of all the AM3440 chassis. At 2.5U and with 4 mini-slots and just 3 single slots, this device is ideal for customers needing a smaller-scale access DCS-MUX.
  • DCS / DS0 cross connect multiplexer - V4150

    DCS / DS0 cross connect multiplexer - V4150

    V4150

    The Protection Relay Shelf support with 1:N (N <= 7) protection for 63ET cards of V4150, this protection scheme allows up to N multiple working lines to be protected by 1 protection line
  • Multi-service Access Node TDM / IP - AM3440-B

    Multi-service Access Node TDM / IP - AM3440-B

    AM-3440-B

    The AM3440-B is the smallest of all the AM3440 chassis. At 2.5U and with 4 mini-slots and just 3 single slots, this device is ideal for customers needing a smaller-scale access DCS-MUX